Products
5355 professional type induction reader

 Technical index

The typical maximum reading distance

ProxCard II - up to 8 "(20 cm)

ISOProx II - up to 7 "(17.5 cm)

ProxKey II Key Pendant - up to 3 "(7.5 cm)

Plus ProxCard card - up to 3 "(7.5 cm)

SmartProx card - up to 5 "(12.5 cm)

* depending on local installation conditions.

The size: 5 "x 5" x 1 "(12.7 x 12.7 x 2.54 cm)

The material: UL 94

The power: 10-28.5 VDC recommends the use of linear power supply. Reverse voltage protection.

The current requirements: average: 100mA (12 VDC); peak 120mA (24 VDC)

The operating temperature: -22 degrees Fahrenheit (F degrees Celsius to -150 - 30 degrees C to -65 degrees C)

The operating humidity: relative humidity 0-95%, non condensing

The weight: 12 ounces (336 grams)

The transmission frequency: 125kHz; excitation frequency: 125kHz

The certificate:

Canadian /UL294 certification: access control system unit

Us FCC certificate

Canadian certificate

- CE logo, the EU fifteen countries under the R&TTE directive (EN60950-ITE

Electrical safety; 330-SRD EN300 and ETS 300 683-EMC)

- electrical safety of CB IEC60950-ITE system

- C- mark in Australia

- New Zealand EMC

The cable distance:

Wei or clock and data interface: 500 feet (152 meters)

RS-232 interface: 50 feet (15 meters)

RS-422 interface: 4000 feet (1219 meters)

The proposed use of ALPHA 1295 (22 AWG) 5 core into a bunch of all shielded cable or the same product. LED or call device control may require other wires.

RS-422 data communication requirements using ALPA 6212C 2 - double line, strip line interference shielding cable or identical products; DC power supply requires use of alpha 1292C dual core shield cable or the same products.

LIT5355DS cost 7/00 to replace 6/99

Installation: installation of the Kong Shi standard for the United States single switch box (vertical installation), the installation is simple. Directly on the metal, can be adjusted to the scene, the impact of a little reading distance. Optional cross connection settings to improve performance.

- Audio Visual Instruction: the show card, red LED flash green pagers will exhibit of lanterns, sound. Multi - color LED lamps and the call can also be controlled by the host system.

- diagnosis: after reading the card reader, the internal will carry out the routine test, check the installation settings, determine the internal and external control of the LED and the call reader, the card reader operation to perform initialization. Outside, the external loop test without any other test equipment, it can verify the reader's output and input.

Trigger mode: access timer or trigger / door lock

Open door time: 10-990 seconds (adjustable)

, indoor / outdoor design: package in solid polycarbonate box, subjected to sun and rain, to resist harsh environment, is not easy to be damaged. Even if the reader with a keyboard, it can be easily installed in any position.

- easy to interface: can be connected with all the control system of the. The reader can output data in the or the clock and data format, and the RS232 and the RS422 sequence interface can be selected.

- Safety: with a protective switch, the reader will send electronic signals when the reader is destroyed. Can be identified more than 137000000000 different code.

- Keyboard options: the keyboard allows for the selection of integrated keyboard, design of the keyboard allows the use of personal identification number (PIN), can provide additional security guarantees. The connection between the keyboard and the main computer system, which transmits the keyboard data via the data transmission line, or is directly connected with the host keyboard interface.

- Bao period: from the date of shipment, the material and the production of defects for life insurance (see the full use of insurance policies).

Part number:

- ProxPro sensor reader - Wei root interface / clock and data interface (can be set) basic component number: 5355

Description: the interface of the Wei, three steady state LED, the internal call is connected

Option: color (grey or beige) keyboard operation LED and pager operation custom tags

ProxPro induction card reader, serial interface

Basic part number: 5352

Description: RS-232 or RS-422 serial interface (can be set), three steady state LED, the internal call is connected

Option: color (grey or beige) keyboard operation custom tags

Last  |  Next