Technical index

The typical maximum reading distance

II ProxCard card - up to 5.5 (14cm)

II ISOProx card - up to 5 (12.5cm)

II ProxKey key - up to 2 (5cm)

Plus ProxCard card - up to 2 (5cm)

* depending on local installation conditions.

The size of

1.7 x 6 x 1 (15.2 x 4.3 2.54cm x)

The material: UL94

The power supply:

Standard type: VDC 4.75-16

Harsh environment: 5-16DVC..

Proposed use of linear power supply.

The current requirements:

Mean 40mA (5 VDC): 50 mA (12 VDC)

Peak 60 mA (5 VDC): 120mA (12 VDC)

The operating temperature:

Relative humidity 0-95%, non setting

The weight:

Terminal 3.5 ounces (99 grams)

Lead type 3.8 ounces (108 grams)

The transmission frequency: 125kHz

Excitation frequency: 125kHz

The certificate:

Canadian /UL 294 certification: access control system

- Canadian /UL 1604 certification (only suitable for use in the case of a bad environment for the use of the card reader): the use of bad environment, the second category, ABCD group

Us FCC certification

- Canadian certification

- European CE logo

- British type certification

- German type certification

- C-Tick logo in Australia

- New Zealand EMC

Remote reader module - 10 feet (3 meters)

Wei root interface - 500 feet (152 meters)

The proposed use of 1295C ALPHA (22AWG) 5 core into a bunch of shielded cable or equivalent products

Cable distance:

Wei root interface: 500 feet (150 meters)

Clock - data interface: 50 feet (15 meters)

The proposed use of ALPHA 1295 (22AWG) 5 core into a bunch of all shielded cable or equivalent products. LED or call device control may also require other wires.

6/00 LIT5365DS replace 6/99

Function introduction

Installation: MiniProxTM appearance is not eye-catching, can be directly mounted on the door frames and other metal materials.

Bad environment with MiniProx card reader installation: all the cards are equipped with the junction box. There are four holes on the connection box, which can be mounted on the right surface.

Audio visual indicator: when the card reader, the red LED will flash green, beep

The device will make a sound. Multi - color LED and call can also be controlled by the host system.

Diagnosis: after reading the card reader, the internal will carry out the routine test, verify the installation settings, determine the internal control of the LED and the call device, the reader's job to initialize. In addition, the external loop test without other test equipment, it can verify the reader's output and input.

Indoor / outdoor design: package in solid polycarbonate box, subjected to sun and rain, to resist harsh environment, and is not easy to be damaged, thus ensuring the on any occasion are reliable.

Easy interface connection: can be connected with all existing protocol control system. The clock and data (magnetic) model can be connected to almost all of the magnetic stripe card reader system.

Bad environment with MiniProx reader interface: using the parameters of the use of the Wei Ren code and card number format for the operation of the code

Security: to identify more than 137000000000 unique code. - Bao Bao: since the date of shipment, the card reader material and the production of defects for life insurance (see the full use of insurance policies).

Part number

Basic component number: 5365.

Basic part number: 5368 clock and data interface

Features: three steady state LED, internal buzzer connected

Option:

Color (grey or beige)

Connection (terminal or lead)

LED and buzzer operation

Custom tags